Desk-Edge Cable Clip – 3D Print STL File, 4 Desk Thicknesses (Digital Download)

Stop cables falling behind your desk. This slide-on clip grips the desk edge and holds three cables in snap-in slots sized for thin charging cables (3.5 mm), headphone/HDMI cables (5 mm) and thicker power cords (7 mm). No sticky tape, no screws, no drilling.

What you get:

• STL + 3MF for 4 desk thicknesses: 18 mm (0.71"), 25 mm (0.98", about 1"), 30 mm (1.18"), 38 mm (1.50")
• Parametric Python source to set your own thickness, slot sizes and width
• Print guide

Print notes:

• Print on its side as supplied. No supports.
• 0.2 mm layers, 4 walls, 40% infill, PETG recommended (PLA ok indoors)
• About 6 g and 10+ per plate, so ideal for farms and sets
• Measure your desk edge and pick a size at least as thick as your measurement; do not scale in the slicer. A true 3/4" (19 mm) desk will not fit the 18 mm clip (use 25 mm). A true 1 1/4" (31.8 mm) desk will not fit the 30 mm clip (use 38 mm)

These models have not been test-printed. Slot and clip fit may need a small tweak after the first print. The product images are 3D renders or diagrams, not photographs of a printed part.

Licence: you may sell physical prints. Please don't resell or share the digital files. Digital download; nothing ships.