Garden Hose Wall Hanger – 3D Print STL File, 3 Arm Sizes (Digital Download)

A sturdy wall hook for a coiled garden hose. The arm is wide so coils can stack, and it turns up at the end so they cannot slide off. Four screw holes in the back plate. Three sizes cover roughly a 50 ft, 75 ft or 100 ft hose.

What you get:

• STL + 3MF in compact (129 x 72 mm arm), standard (159 x 90 mm) and heavy (189 x 110 mm) sizes
• Parametric Python source
• Print guide

Print notes:

• Print on its side as supplied (the hook profile flat on the bed) so layers follow the arm — the strong direction. No supports
• 0.2 mm layers, 5 walls, 40% infill or more
• PETG or ASA outdoors. PLA will creep in the sun
• About 72 g (compact), 99 g (standard) or 131 g (heavy) estimated; check your slicer
• Drain the hose before you hang it. A water-filled hose can be far heavier than a printed hook should carry. No official weight rating; test gradually
• Mount into studs or good masonry anchors, not drywall alone

These models have not been test-printed. The product images are 3D renders / 3D mockups, not photographs of a printed part.

Licence: you may sell physical prints. Please don't resell or share the digital files. Digital download; nothing ships.