Sink-Divider Sponge & Brush Caddy – 3D Print STL File, 4 Divider Widths (Digital Download)

Give the sponge and dish brush a home that drains instead of sitting in a puddle. This saddle caddy sits on the center divider of a double kitchen sink. The basket floor is slatted so water falls through. An outboard cup hangs over one basin: drop a 20–25 mm dish-brush handle through the 28 mm hole so the head rests on the deck with the bristles up. Water drains through the hole into the sink, and the handle hangs clear of the divider and the basin floor.

What you get:

• STL + 3MF for divider widths 18, 25, 32 and 40 mm
• Parametric Python source (divider width, basket size, brush-hole diameter)
• Print guide

Print notes:

• Print sitting on the two saddle legs and the two cup feet, as supplied (Z up, those four feet on Z = 0)
• The saddle roof is a short bridge equal to your divider width (18-40 mm). Use cooling; add supports under the roof only if your printer struggles with that span. The cup itself needs no supports
• 0.2 mm layers, 4 walls, 25-40% infill
• PETG strongly recommended (wet area, occasional hot water). PLA will creep and is harder to keep clean
• About 41-44 g
• Brush hole is 28 mm. Measure the top of your sink divider and pick the closest size. Do not scale in the slicer

These models have not been test-printed. The product images are 3D renders / 3D mockups, not photographs of a printed part.

Licence: you may sell physical prints. Please don't resell or share the digital files. Digital download; nothing ships.