Tiered Holiday Card Display Stand – 3D Print STL File (Digital Download)

Show off holiday cards without leaning them against the wall. This three-row stepped stand lifts each row 14 mm higher than the one in front so every card stays visible on a mantel, sideboard or desk. Each long slot is 184 mm on the 200 mm stand (134 mm on the 150 mm stand) and tilts back 12 degrees.

That fits one standard 5×7 in (127 mm wide) greeting card per row — about 3 standard cards on the 200 mm stand — or two mini / place cards about 90 mm wide (about 6 mini cards), or more if you overlap them. Two standard 5×7 cards side by side (254 mm) will not fit.

What you get (digital download):

• 200 mm version with greeting-card slots (STL + 3MF)
• 150 mm version for small printers (STL + 3MF)
• 200 mm version with thin slots for flat postcard / photo cards (STL + 3MF)
• Parametric Python source
• Print guide

Print notes:

• Print flat as exported. No supports needed (hollow underside uses self-supporting 45 degree roofs).
• 0.2 mm layers, 3 walls, 10-15% infill, PLA or PETG.
• About 85 g of PLA for the 200 mm version (slicer estimate may differ).
• Paint the stars gold for a two-tone finish.

Size: 200 x 73 x 38 mm (the 1 mm star emboss is included; the stepped body without stars is 72 mm deep). Cards not included.

The product images are 3D renders, not photographs of a printed part.

Licence: you may sell physical prints. Please don't resell or share the digital files. This is a digital file; no physical item will be shipped.