Star Mantel Garland & Light Clip - Weight-Free Christmas Mantel Holder STL & 3MF - 5 Sizes, No Supports, Sell Your Prints

Digital download; nothing ships.

Tired of garland sliding off the mantel or lights taped to the paint? This clip grips the shelf from above and below, cradles the garland in an upward-facing U, and snaps the light cord into a front C-clip. A raised star matches the Star Mantel Stocking Clip so the whole mantel looks like one set.

What you get:

• STL + 3MF in 5 mantel thicknesses: 19 mm (3/4"), 25 mm (1"), 38 mm (1.5"), 51 mm (2"), 70 mm (2.75")
• 3MF files split into clip + star for an easy two-colour print
• Parametric Python source to make a clip for any thickness
• Print guide

Print notes:

• Print lying on its side exactly as supplied (strongest direction). No supports.
• 0.2 mm layers, 4 walls, 25–40 % gyroid infill
• PETG recommended; PLA fine for light loads away from heat
• 5 mm walls, filleted corners; about 30–40 g per clip; fits 180 mm beds

The light clip measures 5.49 mm inner diameter with a 3.6 mm snap gap (designed 5.5 mm × 3.6 mm), sized for mini/fairy-light wire (roughly 2–4 mm). Thicker zip cord may not fit.

Measure your mantel shelf about 2 cm from the edge and pick the closest size. Space clips every 30–50 cm. Test with a light section of garland first. Do not use on a hot surround.

The product images are 3D renders, not photographs of a printed part. This design has not been test-printed.

Licence: you may sell physical prints. Please don't resell or share the digital files.